# Tech file content
# generated by EE Circle TraceAnalyzer
# on 9-29-2004 at 10:53
# Unit
Unit um
# BEGIN material Er_3.25
material Er_3.25
 type = insulator
 er = 3.25
 tand = 0.02
 mr = 1.0
 sigma = 0.0
 ;
# END material Er_3.25
# BEGIN material Copper
material Copper
 type = conductor
 er = 1.0
 tand = 0.0
 mr = 1.0
 sigma = 7.0E7
 ;
# END material Copper
# BEGIN material air
material air
 type = insulator
 er = 1.0
 tand = 0.0
 mr = 1.0
 sigma = 0.0
 ;
# END material air
# BEGIN material FR4
material FR4
 type = insulator
 er = 4.2
 tand = 0.02
 mr = 1.0
 sigma = 0.0
 ;
# END material FR4
# 1: The 1-th dielectric layer 
 layer air
 thickness = 10.0
 ;

# 2: The 1-th metal layer 
 layer Copper
 index = 1
 thickness = 5.0
 under_cut = 0.0
 # constructed with entire_plane
 trace_over_boundary = yes
 trace_over_boundary = no
 # between dielctric Layers 1 and 2
 z_offset = 0.0
 ;

# 3: The 2-th dielectric layer 
 layer Er_3.25
 thickness = 13.4
 ;

# 4: The 2-th metal layer 
 layer Copper
 index = 2
 thickness = 1.4
 under_cut = 0.0
 trace_over_boundary = yes
 # between dielctric Layers 2 and 3
 z_offset = 0.0
 ;

# 5: The 3-th dielectric layer 
 layer Er_3.25
 thickness = 12.0
 ;

# 6: The 3-th metal layer 
 layer Copper
 index = 3
 thickness = 5.0
 under_cut = 0.0
 # constructed with entire_plane
 trace_over_boundary = yes
 trace_over_boundary = no
 # between dielctric Layers 3 and 4
 z_offset = 0.0
 ;

# 7: The 4-th dielectric layer 
 layer air
 thickness = 10.0
 ;